Poids des composants et épaisseur des parois pour la fabrication de composants en GAIM

Autor/en: Chandan Deep Singh
CHF 69.40
Einband: Kartonierter Einband (Kt)
Verfügbarkeit: Folgt in ca. 5 Arbeitstagen
+ -

Le moulage par injection assistée par gaz (GAIM) a été mis au point pour économiser des matériaux, réduire les temps de cycle et améliorer l'aspect de surface des pièces moulées par injection à parois épaisses. Il est impossible de contrôler le gaz et de l'utiliser dans le moulage des matières plastiques, car le gaz brûle et explose à haute température et à haute pression. Il est très difficile de vérifier la qualité d'une pièce moulée assistée par gaz, car elle dépend de la géométrie de son canal de gaz et de l'uniformité de l'épaisseur de sa paroi. Ces éléments ne peuvent être vérifiés qu'après la coupe transversale et ces pièces seront rejetées. Dans GAIM, le poids de la pièce est un critère très important et nous devons maintenant établir une relation avec l'épaisseur de la paroi de la pièce. L'étude GAIM, les essais, les résultats, l'analyse et notre expérience montrent que le poids de la pièce est proportionnellement lié à l'épaisseur de la paroi. Dans le processus de fabrication de composants par moulage par injection de gaz, on remarque que la qualité et la résistance des pièces sont toujours un sujet de préoccupation lorsque l'épaisseur de la paroi n'est pas uniforme ou incontrôlée.

ISBN: 978-620-6-96030-0
GTIN: 9786206960300
AutorSingh, Chandan Deep / Singh, Bahadur / Singh, Sukhjinder
VerlagSciencia Scripts
EinbandKartonierter Einband (Kt)
Erscheinungsjahr2023
Seitenangabe92 S.
AusgabekennzeichenFranzösisch
MasseH22.0 cm x B15.0 cm x D0.7 cm 155 g

Über den Autor Chandan Deep Singh

Dr. Chandan Deep Singh is working as assistant professor in Department of Mechanical Engineering, Punjabi University, Patiala, Punjab (India) since 2011. He has completed his Ph.D. in November 2016 from the same institution. His M.Tech. (Manufacturing Systems Engineering) is from Sant Longowal Institute of Engineering and Technology, Longowal, Sangrur, Punjab (India), completed in 2011. He completed B.Tech. in Mechanical Engineering in 2009 from Giani Zail Singh College of Engineering and Technology, Bathinda, Punjab (India). He has scored 94.8 percentile in GATE examination in 2010. He has published 57 books (2 books including his PhD thesis have been published by Taylor and Francis) and guided 57 students for M.Tech. thesis. He has published more than 77 papers in various scopus/SCI indexed international journals and 14 papers in international conferences. To add to it, 4 papers have been accepted and 6 papers are under review in scopus/SCI indexed international journals. Further, a book, as an editor is accepted in Wiley-Scrivener Publisher. Presently, 1 M. Tech. and 8 Ph. D. students are working under his guidance. Lastly, 2 chapters in book have been selected by Taylor and Francis in their initiative SDGO and 2 chapters have been accepted for publication in Wiley- Scrivener in HICO 2021.Dr. Harleen Kaur is working as Manager (HR) at DELBREC Industries, Pvt. Ltd., Chandigarh. Earlier, she has served as Assistant Professor of Management in Asra Institute of Advanced Studies, Bhawanigarh till Sept 2019. Till 2013, She had worked as HR (Executive) at International Farm Fresh Products (India), Ltd., Channo (Bhawanigarh). She has completed her Ph.D. in 2019 from Punjabi University, Patiala. She did her MBA in HR from RIMT, Mandi Gobindgarh in 2011. She has published more than 10 research papers in various international journals and conferences along with 19 books with international publishers (her PhD thesis has been published as a book by Taylor and Francis). To add to it, 2 papers have been accepted and 4 papers are under review in scopus/SCI indexed international journals. Further, a book, as an editor is accepted in Wiley-Scrivener Publisher. Lastly, 2 more chapters have been accepted for publication in Wiley- Scrivener in HICO 2021.

Weitere Titel von Chandan Deep Singh

Nur registrierte Benutzer können Produkte bewerten